News

Terminal storage life can be long or short, long months years, short days, weeks, some need to make long-term inventory plan for customers, while others order production immediately out of storage. Terminal reliability and storage life can be improved by adopting a first-in, first-out inventory strategy, a traceability label system, proper packaging, corrosion prevention, improved storage conditions, and proper terminal material and design. https://www.bossgoo.com/product-detail/insulated-female-connectors-connector-copper-lugs-61373843.html Terminals are often exposed to a number of different environmental factors, such as during transportation and storage, during manufacturing, during installation, maintenance and end-customer use. These environmental factors can be understood as given conditions, which can be subdivided into temperature, humidity, corrosion, pollution, internal and external conditions, and human factors. The duration of exposure to changing conditions from these environmental factors must also be defined. Storage, high-current terminal storage environments vary from controlled clean, heated or air-conditioned, damp warehouses, offices or factories to uncontrollable corresponding environments. The service life of the terminal is seriously affected by heat, humidity, or corrosion. In these uncontrolled environments, weldability storage life is greatly reduced by oxidation, corrosion, and increased metallization; The surface and function of metal devices are affected by rust, patina and other forms of corrosion; Plastic as an insulating material can also be affected by deterioration of its flexibility, strength and shape. Wiring terminals are generally composed of shrapnel, conductive parts and insulating parts (plastic case). When wiring, the screwdriver import plastic shell on the right side of a square hole, upward tilt screwdriver, give a downward pressure shrapnel, shrapnel square hole can be aligned with the conductive wire frame of holes, again from plastic shell hole into the wire, make it into the conductive parts so as to realize the connection of wires and terminals, wire connection, then the terminal plug and fixed on the circuit board supporting the socket connection, Can realize the circuit board to transmit signal function. It should be pointed out that when the socket of the wiring terminal block is connected with the plug, the solder feet (or conductive parts) in the socket can achieve seamless contact with the conductive parts in the plug, so as to ensure good conductive effect. The unwiring process is similar to the wiring process. Press the spring downward with a screwdriver and pull out the conductor directly from the conductive part.

Contact force is one of the basic elements in terminal blocks. If there is not enough contact pressure, a good conductive material is of no use. Because, if the contact force is too low, there will be displacement between the wire and the conductive sheet, resulting in oxidative pollution, so that the contact resistance increases and lead to overheating. In the case of the DRTB2.5 pressed wire frame assembly, an actual contact force of up to 750N can be generated by applying only 0.8Nm of torque to the screw, independent of the wire cross section. Therefore, the use of terminal crimping frame has no environmental influence, large contact area, large contact force permanent connection. Voltage drop small contact voltage drop size is also one of the dimensions to identify the quality of the wiring block. Even with a small force distance applied to the screw, the voltage drop value is still significantly lower than the limit required by VDE0611. Meanwhile, the applied torque varies over a wide range and the voltage drop is almost constant. Therefore, although different operators use different amounts of torque, it does not affect the quality of the connection. This is another proof of the reliability of the crimping frame at the terminal. A contact force with a large self-locking function is meaningful only if it is persistently applied to the wire. https://www.bossgoo.com/product-detail/non-insulated-spade-terminals-61374045.html The terminal uses the crimping frame for maximum reliability in this respect. During the screw tightening process, the threaded tongue on the crimping frame springs up, resulting in a reaction force against the screw. The change in wire diameter due to temperature is offset by the elastic action of the wire pressing frame itself, so there is no need to tighten the screw again. The wire frame was subjected to an aging test for 168 hours at 130oC, followed by a vibration test for 168 hours at 20 times the acceleration of gravity. After completing these more rigorous tests than VDE0611, the wire pulling force from the wire frame is still more than VDE0611 specified As much as six times higher, and the voltage drop remains constant. This shows unequivocally the maintenance-free nature of the crimping frame at the terminal. Air-tightness various environmental factors, such as temperature and humidity of the air a definitive effect on the terminal, terminal must have the ability to endure the test of adverse environmental factors, according to the regulation of DIN41640. 76 of the test and practical experience has shown that even in connection with no end of pressure under the condition of soft wire, wire frame can maintain its airtight performance.

It is stipulated that when stripping the sheath of the conductor (cable), the conductor core shall not be harmed and the metal material of the conductor core shall be exposed. The length of cable sheath to be peeled off when using cage terminal cold-end terminal should comply with the requirements of Table 1; Is a face of wiring and his cage play yellow cabling is not clear when the length of the wire stripping, the special screwdriver inserted into the first cold pressing terminal processing technology of square hole, make cold end Huang Kong stretches out of bullets, plug the cable into deep cold-press terminal round hole met frictional resistance (by), remove the special screwdriver, plugged into a special screwdriver, remove the wire, In this case, the length of wire imprinting distance is the length of the end line of the cord end terminal. Step 2 Clean the surface https://www.bossgoo.com/product-detail/vinyl-wire-end-caps-insulated-terminal-61373436.html Before installing cord end terminals and wires, carefully clean the strip cores and cord end terminals. Ensure that smooth exposed wires are only conductive materials and dirt. Clean the cord end terminals inside. The detection method is estimation. Step 3 Insert the core wire into the cord end terminal cover When inserting the stripped core into the cord end terminal cover, insert all the cores into the terminal. The detection method is estimation. Cord end terminal Cord end crimping The conductor terminal to the conductor must be crimped with a special network cable pliers. The detection methods in this section are all estimation. The cross section of the conductor must conform to the specifications and models of cord end terminals. The shaft rod of the special crimping tool should be consistent with the cross section of the wire, and the network cable pliers must be within a relatively limited time limit. The crimping part is in the middle of the cord end terminal cover. The crimping part is properly specified. When using v-shaped rod crimping pliers, it should be imprinted on the bottom of the cord end terminal cover. The crimping part is properly specified. When using the special tool of endless bit equipment, the rocker of the special tool must be pressed to the bottom to achieve the physical properties specified in Note 3. Specify rocker thorough pressure exactly. 66mm2 and above tubular terminal cord end terminal crimping end when inserting the terminal into the spring yellow terminal, touch the large cross-section of the tubular terminal with the spring yellow metal sheet. The large-cross section housing is oriented toward the cord end terminal management center. Step 4 Installation of wire identification (line number) When the heat-shrinkable casing is used as wire marking, the wire marking should be set on the wire before crimping, and then the crimping work should be carried out. Do not use the heat shrink tubing on the one-sidedness of the cord end terminal. If a yellow cage terminal is used, the heat shrink tubing should be used at the place where the cable jacket is removed from the distance of 11mm. The insertion of wire marking shall be the insertion of marking data or English letters along the radial direction of wire. When marking the horizontal position, the data or English letters should be aligned (to the operator), and the data bits (the last bit) should be away from the cord end terminal, as shown in Figure 7 to Figure 8. The standard mark is symmetrical and clear, and the orientation is appropriate. The fifth step is detection method The detection method is meter scale estimation. Suitable cord end terminals should be used according to the cross section of the wire, and the specifications and models should be exactly the same. The length of cable sheath stripped meets the requirements and the specified length is appropriate. All the wires of the wires are completely wrapped in the cord end terminal, and there is no scattered copper wire. The crimping part meets the requirements, and the specified crimping part is appropriate.

We usually say Insulated Terminals have what bad problems, there are many reasons is caused by improper use, terminal plastic insulation materials and conductive parts is directly related to the quality of the terminal, a lot of the time our technical operation error, terminal blocks appear problem, must touch the part of the conduction conduction, and secure touch firmer. Insulation parts should not be conductive must be insulated. Most of the time the problem of the terminal is poor contact, there will be a touch layout planning is not very reasonable. https://www.bossgoo.com/product-detail/insulated-spade-type-crimp-on-connectors-61372438.html We are used when you need to pay attention to the Connecting Terminals, the insulation of the terminal needs to be considered bad problems, in order to make the insulation effect is good, must adhere to the correct orientation, terminal has good electrical connection function, if improper operation, will cause the terminal leakage phenomenon, also can cause terminals in advance ageing, as well as the short circuit phenomenon. Xiaobian in the design and manufacturing process, all kinds of problems in the process of use were tested in practice, so as to prevent problems in the first, and develop detailed specifications for customers.

To solve the problem when using the terminal, pay attention to the following phenomena: The first phenomenon: the wiring terminal is not in good contact. The metal conductor inside the wiring Connecting Terminals is the core part of the terminal. It transfers the voltage, current or signal from the external wire or cable to the contact corresponding to its matching connector. Therefore, the contact must have excellent structure, reliable contact holding force and good electrical conductivity. The second phenomenon: poor insulation of the terminals: the function of the insulator of the Insulated Terminals is to keep the contacts in the correct position, and to insulate each other between the contacts and the contacts and between the contacts and the shell. Therefore, the insulating parts must have excellent electrical properties, mechanical properties and process forming properties. Especially with the widespread use of high-density and miniaturized terminal blocks, the effective wall thickness of insulators is getting thinner and thinner. Third phenomenon: Poorly fixed terminal block insulators not only insulate, but also usually provide accurate neutralization protection for extended contacts, and also have the function of installation, positioning, locking and fixing to the equipment. Bad fixation, light influence contact reliability resulting in instant power failure, serious is product disintegration. https://www.bossgoo.com/product-detail/electrical-copper-pre-insulated-ring-terminal-61372108.html

Screw connection terminals have been playing an important role in the electronic industry and have now become an important component of printed circuit boards. Its structure takes into account the characteristics of convenient wiring and firm screw connection. Spring connection terminals, spring connection PCB terminals are divided into two types: pull-back spring connection and butterfly spring connection. The pull-back spring terminal and screw terminal can be compatible with each other, greatly increasing the flexibility. Reliable connection, front connection, visible connection, low maintenance, no tightening required. https://www.bossgoo.com/product-detail/insuated-ring-copper-terminals-and-connectors-61372253.html The wiring terminal uses the existing rail type wiring Insulated Terminals RTB connection technology, and adds the circuit composed of electronic components, to realize the transmission and coupling of photoelectric process. Automatic control is the core of the control unit must be isolated from various sensors and actuators in a reliable way, in order to avoid interference, the RPC light insulation terminal is able to accomplish this function, and to ensure that the signal with the electronic control device of low voltage required to match, can also be peripheral devices and control of the process control, signal and regulator device interfaces between components, And suitable for different voltage and power range. Cable Terminals have large contact surface and large contact pressure, and can be arbitrarily connected horizontally. With self - locking, anti - seismic, anti - loose function. Test jack can be installed without maintenance. Contact point absolute airtight, corrosion resistance. Multiple strands are allowed to be connected directly without crimping the end. Easy to use, widely used in the world contact pressure. Optical insulation terminal has the advantages of high switching frequency, no mechanical contact jitter, no wear switching, high insulation voltage, no vibration, not affected by position and long life, so it has been widely used in the field of automatic control.

Once the copper pipe terminal fire, the fire fierce, agile extension, when burning a lot of harmful gas, constitute a difficult remedy. After the copper tube terminal is burned out, the correction time is long and the loss is severe. Therefore, great attention must be paid to prevent the copper tube terminals fire. So what are the factors that lead to high voltage copper pipe terminal accidents? https://www.bossgoo.com/product-detail/ks-tinned-copper-cable-terminal-lugs-61371147.html 1. The site conditions are relatively poor. The environment and technical requirements of copper pipe terminals and joints are very high when they are manufactured in the factory, while the temperature, humidity and dust at the construction site are not well controlled. 2. The installation is not strictly in accordance with the technical construction or technical rules without considering the questions that may be presented. Dc withstand voltage test is selected for completion inspection to constitute anti-electric field in the joint, resulting in insulation damage. 3, due to poor sealing treatment. The center joint must choose the metal copper shell plus PE or PVC insulation anticorrosive layer of the sealing structure, in the field construction to ensure the tightness of the lead seal, so effectively ensure the sealing waterproof function of the joint. 4, copper pipe terminal construction process in the insulation surface will inevitably leave subtle skid marks, semi-conductive particles and sand on the emery cloth may also be embedded in the insulation, other joint construction process because of insulation exposure to the air, insulation will also inhale water, these leave danger for long time safe operation. 5, the brass terminals material itself and the brass terminals manufacturing, installation, inevitably exist in the process of terminal manufacturing defects, the operation of the electric heating, chemical, environmental factors influence, the insulation of the brass terminals will attack different degree of aging, the aging will eventually led to the outbreak of the brass terminals with.

Terminals are anti-oxidation and anti-corrosion. Part of the circular, fork terminal in the same specification and electrical connection part is divided into different widths, to adapt to different customer width needs. The terminal insulation sleeve is funnel-shaped, easy for wire insertion, and the color is divided according to the international code area, can clearly distinguish the wire range. Selection of fine thick copper plate to ensure user safety. The thickness of the terminal will directly affect the current load, temperature and pressure strength. High quality welding terminal, to ensure that there will be no crack after pressing, in the harsh use of the environment, still can have a strong and reliable pulling force. Terminal is able to achieve safe, reliable, effective connection, especially in the use of high current, high voltage environment is widely used. Spring type, is the use of spring device of the new type of terminal, has been widely used in the world electrical and electronic engineering industry, lighting, elevator control, instrumentation, power supply, chemistry and automotive power. Track installation, using reliable thread connection technology, electronic fuse technology and the latest electric connection technology, widely used in power electronics, communications, electrical control and power supply fields. Unswerving, professional quality. https://www.bossgoo.com/product-detail/insulated-socket-connectors-f5-5b-61373726.html The important role of wiring terminals. Terminal it is the use of the latest connection technology developed and become, which adds a lot of electronic application components. Contains a highly complex circuit system to achieve photoelectric transmission. In fact, the core of the terminal is the control element inside, it is well isolated from the sensor and the actuator, do not interfere with each other, can be very good to ensure that the signal is consistent with low voltage, but also can be very good control of other equipment, can also apply to different working voltage. In addition, the terminal also has a strong ability to control the signal, no mechanical jitter, high frequency, no switching wear and other advantages, but also because of these high performance advantages, it makes this kind of automatic control device can be widely used.

As we know, terminal blocks are part of connector devices, but there is a big difference between terminal blocks and connectors in marketing mode. Connector practitioners mainly appear as traders. And wiring terminals mostly appear in the manufacturer's situation. This illustrates the hierarchical difference between connectors and terminal blocks. In terms of technology, the production technology requirements of connector products are high, and the testing environment is harsh. Many businesses cannot meet the production and monitoring requirements of products. Many large connector manufacturers have established networks all over the world, so connector practitioners can spend their time acting as agents, earning commissions and certain rewards without investing too much technical capital. https://www.bossgoo.com/product-detail/longyi-nylon-female-spade-connector-insulated-61372472.html For wiring terminals, the need for a slightly lower technology, but because of the sale of wiring terminals, wiring terminals to manufacturers of the situation, so in the market, wiring terminals are not inferior to connectors. Terminals and connectors have their own industry rules. The sales mode of wiring terminal is mainly manufacturer, connector processing manufacturer/connector trading manufacturer - connector terminal customer, connector sales mode is mainly connector trader - connector manufacturer/connector trader - to connector terminal customer.

Terminal crimping is usually the use of special terminal machine for operation, it has very strict technical standards, mainly including: pull force size, symmetry... And so on. https://www.bossgoo.com/product-detail/insulated-pin-terminals-pin1-25f-terminal-61373688.html A well-crimped terminal can not only ensure the integrity of mechanical strength but also meet the requirements of electronic aspects, the following will be introduced in the form of pictures in general naked eye conditions can be identified by the improper crimping terminal products. If the terminals are not crimped correctly on the cable, you will forget all the hard work that went into selecting the right terminals. While there are common crimping height issues that can reduce the reliability of your product, they can be easily avoided with a little knowledge and foresight. The crimp height is the cross section height of the body crimp area after crimp, and it is the most important feature of good crimp. Terminal manufacturers have increased the crimp height for each cable size designed for the terminal. The correct crimp height range or tolerance for a given cable may be as small as 0.002 ". Under such strict specifications, it is important to verify that the crimp machine is set up correctly to obtain good crimp. If the crimping height is too small or too large, the crimping strength (holding force against the cable terminal) cannot be provided. As a result, the drawing force and rated current of the cable are reduced, and the performance of the crimping terminal is degraded in abnormal working conditions. Too small crimping height can also crush the conductor core or just break the metal in the conductor crimping area.

The copper terminal must withstand the high temperature in the preheating zone and the temperature transmitted to the terminal body by wave soldering during the whole assembly process. Flux must not affect terminals and must be easily removed without any residue. The entire assembly process must be water-washable. Preheating temperatures are often 100°C or higher, and peak temperatures of 280°C are not uncommon. Perforated soldering pins must be accurately positioned, of suitable size, evenly placed, and of good solderability to facilitate insertion and welding. In the whole assembly process must withstand the heat treatment of high temperature impact, in welding mainly used infrared preheating and convection preheating heat conduction to the solder needle and tin plate interface to melt solder paste. Contact anti-fusion welding performance is poor, in the start of the motor or circuit short circuit, large current to contact. The head is welded firmly and cannot be released. The pure silver contact is easier to fuse and weld. The main contact of ac contactor should choose the silver base alloy with strong fusion welding ability, such as silver iron, silver nickel and so on. https://www.bossgoo.com/product-detail/longyi-insulated-copper-terminal-connector-fork-61370833.html The copper terminal has good connection characteristics even when the temperature fluctuates greatly. Because this can avoid different degrees of thermal expansion due to the difference of thermal expansion coefficient of the material, so it can avoid mechanical stress in the terminal, to avoid the loosening of the connection. Use "Reakdyn principle" to prevent terminal screw from loosening. In the preferred terminal series with rated cross sections up to 10mm2, the crimping frame adopts the lifting cylinder structure. Their principle of action is based on the so-called "lifting drum principle". The constant improvement of circuit board technology has greatly increased the amount of current that can be carried by the copper tube terminals mounted on the panel.

2026 marks a pivotal year for China’s cable terminal industry, driven by new energy demand, intelligent upgrades, and export expansion. The global market is projected at $7.8 billion, with China’s output valued at 352.4 billion yuan (+7.2% YoY). Exports reach 9.87 billion yuan (+11.5% YoY), led by ASEAN (+23.4%), the Middle East, and Belt & Road markets. Technological Breakthroughs: High-end terminals (high-voltage, smart sensing) now account for 39.6%. Advanced materials (high-conductivity copper alloys, graphene composites) deliver 450MPa+ tensile strength and ≤0.3mΩ contact resistance. Smart terminals integrate temperature sensing & IO-Link for real-time monitoring. New standards (GB/T 4208) mandate IP68/IP69K protection. Production & Market: Coastal clusters (Jiangsu, Guangdong, Zhejiang) lead. Industry consolidation accelerates; automated "dark factories" and digital inspection prevail. High-current terminals (≥60A) for EVs, energy storage grow 14.3%+. Green-certified products command 5–12% export premiums. Outlook: The industry shifts to high-performance, miniaturized, intelligent, and green solutions. EVs, wind power, and data centers will sustain growth, with technology & compliance as key competitive advantages.

With the transformation of the global energy structure, the continuous growth of electricity demand and the rapid development of intelligent technology, the cable terminal industry is ushering in unprecedented development opportunities. As a key component in the power transmission and distribution system, the market demand for cable terminals will continue to expand, and technological innovation will become the core driving force for the development of the industry. Market demand continues to grow   1. Rapid development of the new energy industry With the widespread application of renewable energy such as photovoltaics and wind power, the application demand of cable terminals in new energy power generation systems has increased significantly. High-performance terminals can effectively improve the efficiency of power transmission and reduce energy loss, becoming an important part of new energy infrastructure.   2. Accelerated construction of smart grids The construction of smart grids around the world has brought new growth points to the cable terminal industry. Smart grids have put forward higher requirements for the stability and safety of power transmission, and promoted the research and development and application of high-performance and intelligent terminals.   3. Urbanization and infrastructure upgrades The accelerated urbanization process and the transformation and upgrading of old power grids have further driven the market demand for cable terminals. Especially in the fields of rail transit, data centers, electric vehicle charging piles, etc., the application scenarios of terminals are constantly expanding.   Technological innovation leads industry change 1. Application of high-performance materials The research and development of new copper alloys, nano-coatings and other materials have significantly improved the conductivity, corrosion resistance and oxidation resistance of terminals. For example, terminals with nano-coatings can reduce contact resistance, improve transmission efficiency and extend service life.   2. Intelligent and digital upgrades Intelligent terminals can monitor parameters such as temperature and current in real time by integrating sensors and communication modules, and realize fault warning and remote diagnosis. This technology not only improves the safety of the power system, but also reduces operation and maintenance costs.   3. Green manufacturing and sustainable development The application of environmentally friendly materials and energy-saving production processes makes the cable terminal industry more in line with the global carbon neutrality goal. For example, terminals made of renewable materials and low-energy production processes are becoming a new trend in the development of the industry.   Continuous expansion of application areas The application areas of cable terminals are expanding from traditional power transmission to more emerging fields: New energy vehicles: The demand for terminals in electric vehicle charging piles and battery connection systems is growing rapidly. - 5G communication: 5G base station construction requires a large number of high-performance terminals to ensure the stability of signal transmission. - Industrial Automation: The development of smart manufacturing and industrial Internet of Things has driven the demand for industrial terminals. Industry Challenges and Countermeasures Despite the bright prospects, the cable terminal industry also faces some challenges: 1. Fluctuation of raw material prices Fluctuations in the prices of metals such as copper and aluminum may affect production costs. Companies need to reduce costs through technological innovation and supply chain optimization. 2. Intensified international competition As global market competition becomes increasingly fierce, companies need to improve product quality and technical content to enhance their competitiveness. 3. Stricter environmental regulations As environmental regulations become increasingly stringent, companies need to accelerate green transformation and adopt environmentally friendly materials and processes.   Future Outlook In the future, the cable terminal industry will continue to maintain rapid growth driven by technological innovation and market demand. Intelligence, high performance, and green environmental protection will become the main direction of industry development. Companies need to keep up with technological trends, increase R&D investment, and expand application areas to take the lead in the fierce market competition.

With the transformation of the global energy structure and the continuous growth of electricity demand, cable terminal connectors, as key components in the power transmission system, are ushering in a new round of technological innovation. The application of high-performance materials, intelligent design and green manufacturing technology has promoted the cable terminal connector industry to develop in the direction of high efficiency, safety and environmental protection.   High-performance materials improve product reliability In order to meet the use requirements in extreme environments such as high voltage and high temperature, the material research and development of cable terminal connectors has made important breakthroughs. For example, an international leading company has successfully developed a new copper alloy material, which has better conductivity and corrosion resistance than traditional materials, and can significantly improve the service life and safety of terminal connectors.   In addition, the application of nano-coating technology has also greatly improved the oxidation resistance and wear resistance of terminal connectors. For example, a scientific research team has developed a new nano-coating that can reduce the contact resistance of terminal connectors by more than 20%, while improving their anti-aging performance.   Intelligent design optimizes installation efficiency With the rapid development of smart grids, the intelligent design of cable terminal connectors has become an industry hotspot. By integrating sensors and communication modules, terminal connectors can monitor parameters such as temperature and current in real time, and transmit data to the monitoring center through wireless networks to achieve fault warning and remote diagnosis. For example, the intelligent terminal connector launched by a certain company can automatically detect the installation status and prompt the installer through the LED indicator, which greatly improves the installation efficiency and accuracy.   Green manufacturing promotes sustainable development Driven by the global carbon neutrality goal, the cable terminal connector industry is accelerating its transformation towards green manufacturing. Enterprises have adopted environmentally friendly materials and processes to reduce pollution emissions in the production process. For example, a company has launched a terminal connector made of renewable materials, and its carbon emissions in the production process have been reduced by more than 30%.   Continuous expansion of application areas Cable terminal connectors are widely used in power, communications, transportation and other fields. With the rapid development of the new energy industry, its application in photovoltaic power generation, wind power generation and other fields is also becoming more and more extensive. For example, in photovoltaic power generation systems, high-performance terminal connectors can effectively improve the efficiency of power transmission and reduce energy loss.   Broad market prospects, challenges and opportunities coexist In the future, with the transformation of the global energy structure and the continuous growth of electricity demand, the cable terminal connector industry will usher in a broader market prospect. However, the industry is also facing challenges such as fluctuations in raw material prices and international trade frictions. Enterprises need to strengthen technological innovation, improve product quality, and expand application areas to meet challenges, seize opportunities, and achieve sustainable development.

The role of crimping terminals Crimping terminals, also known as crimping terminals or crimping terminals, are a type of component widely used in electrical connections. Its main function is to connect wires or cables to electrical equipment or systems by crimping to achieve current or signal transmission. The use of crimping terminals has many advantages, including improving the reliability of the connection, simplifying the installation process, and improving work efficiency. 1. Improve the reliability of the connection Crimping terminals use special crimping tools to press the conductor of the wire or cable into the inside of the terminal to form a tight electrical connection. This connection method can effectively prevent the loosening or falling off of the wire or cable, thereby improving the reliability of the connection. The design of crimping terminals usually has excellent electrical properties, which can ensure the stable transmission of current or signals and reduce electrical failures caused by poor connections. 2. Simplify the installation process Using crimping terminals for electrical connection does not require complex welding or winding processes, and only requires the use of special crimping tools. This not only simplifies the installation process and reduces the technical requirements for operators, but also reduces safety hazards during installation. Crimp terminals are usually small in size, easy to carry and store, and easy to install in small or complex environments. 3. Improve work efficiency. Crimp terminals are fast to install and easy to operate, which can greatly improve the work efficiency of electrical connections. Especially in situations where a large number of connections are required, such as power systems, communication networks, etc., the use of crimp terminals can significantly shorten the construction period and reduce labor costs.

Taixing Longyi Terminal Co., Ltd. recently announced the launch of a new product series aimed at meeting customers' needs for high-quality terminals. As an enterprise specializing in the production and sales of terminals, Taixing Longyi Terminal Co., Ltd. has been committed to providing customers with the best quality products and services. The new product series adopts the latest technology and process, has higher safety, reliability and durability, and can meet the needs of various application scenarios. In addition, the company has also strengthened the control and management of product quality to ensure that each product meets industry standards and customer requirements. At the same time, the company also provides a full range of pre-sales and after-sales services to provide customers with more convenient and efficient solutions. Taixing Longyi Terminal Co., Ltd. will continue to adhere to the concept of "quality first, customer first", constantly innovate and improve product quality and service level, and create greater value and benefits for customers.

The following Jin Longyi Xiaobian to tell you what the terminal line tension standard is, I hope to help you oh. The pulling force data between terminal and wire can ask your supplier for, what the supplier provides is reliable and persuasive. Or you test the standard set by the original manufacturer (MOLEX,JST,AMP). In fact, our company can develop: each terminal model to the sample of 30, or more, of course, the more the better, of course, to meet the terminal pressure high standards, can be tested. After completion, the tension machine is used to test the tension, and the X-bar management chart is used to analyze the good state. After the tension is obtained, the average value is measured. There are tolerances, of course. It depends on the requirements of your customers.

Copper tube terminal production and manufacturing precautions in the scientific research of copper tube terminal quality assurance problems are will take into account the various natural environment it encountered, then, in the design of the terminal will fully consider all raw materials including metal composite materials and raw materials. The raw material will harm the quality of wiring terminals, this problem is all the design staff in the design of copper terminal to take into account. The quality characteristics of the terminal insulation layer shell are as high as the metal structure, the vast majority of the insulation layer shell is made of PA66, PC, PP and other plastic. No matter which kind of raw material, the shell is stipulated to achieve the corresponding fire grade, temperature resistance, environmental protection characteristics, dielectric strength and impact toughness. The key of the brass terminals metal material components of the electrical conductivity, screws and clamping piece, in which the key is the conductivity of the copper content is how much, in the national standard "household and similar use plug socket (GB2099) and the fixed device of the electrical switches for household and similar purposes" (GB16915), clearly stipulates composition of copper is 58% less. Copper has very good metal material laser cutting processing characteristics and high corrosion resistance characteristics; Copper is only second to silver in conductivity. Therefore, copper is particularly suitable for the composition of electrical and mechanical connection components such as terminals. Copper metal products and copper wire have basically the same linear expansion coefficient, to prevent the temperature fluctuation caused by different levels of thermal deformation, so it can prevent the copper tube terminals caused by mechanical equipment stress, prevent the resulting loosening of the connection. Screws and clamping pieces of copper alloy is commonly used in raw materials, or surface plating process antirust treatment of steel raw materials, the key is to have the corrosion features and plenty of impact toughness, under normal circumstances do not apply an surface plating process antirust treatment of steel raw materials, it can prevent the steel metal products and copper wires in a damp condition of rechargeable batteries, To prevent the occurrence of unreliable electrical connection and screw rust caused by electrical erosion. The surface of the general steel component must be plated with nickel, which can have a certain anti-corrosion effect.

The failure rate of terminals increases exponentially with the rise of temperature, and the service life decreases exponentially with the rise of temperature. The service life of terminals will be halved when the ambient temperature increases by 10 ° C. General installation environment requirements for terminals are as follows: Low ambient temperature -5 ° C, high ambient temperature 40 ° C.

Terminal blocks are the most basic items for purchasing personnel working in the electrical field. Because of the function of transmitting signals, any electrical can not do without terminal blocks. The appearance of terminal products can not be described by color, but you can see the shape, color, smoothness and other factors of the appearance. Generally speaking, the terminal shape is regular, no concave and convex plane, no burr is preferred; Color check whether it is the color you need, there is no color difference; Whether the coating of conductive parts is uniform, whether due to the bad storage time or storage environment rust; Terminal needle distance size is consistent with the national standard creepage distance, needle distance is uniform. To smell means to smell. In order to save cost, some businesses will be used for many times to do the production of raw materials to shape the terminal, in order to cover up the taste of the material, add aromatic agent in it, this terminal will smell a light fragrance after getting. Encounter this kind of terminal, should distinguish seriously.